Chemicals remove Konform beläggning

I Montering av kretskort och SMT-montering, removing Konform beläggning is often necessary for repair, rework, or inspection. The type of chemical used depends on the coating material (acrylic, silicone, polyurethane, epoxy, or parylene), as each has different resistance properties.

Common chemicals for removing Konform beläggning

Solvent removers (for acrylic coatings)

Akryl Konform beläggning is the easiest to remove.

Common chemicals:

• Acetone
• Isopropyl alcohol (IPA)
• Specialized acrylic removers

Features:

• Fast and effective
• Minimal damage to PCB when used properly
• Widely used in Montering av kretskort rework

Solvent blends (for polyurethane coatings)

Polyurethane coatings require stronger chemicals.

Common chemicals:

• Dedicated urethane removers
• Solvent blends (e.g., glycol ethers, esters)

Features:

• Good effectiveness with controlled exposure
• May require brushing or soaking
• Common in industrial SMT-montering repair

Silicone removers

Silikon Konform beläggning is more resistant and harder to remove.

Common chemicals:

• Silicone stripping agents
• Swelling solvents (to soften coating before removal)

Features:

• Usually requires mechanical assistance (scraping)
• Slower process compared to acrylic

Epoxy removers

Epoxy coatings are very difficult to remove chemically.

Common chemicals:

• Strong industrial epoxy strippers
• Often combined with heat or mechanical removal

Features:

• Time-consuming and aggressive
• Risk of damaging components or PCB
• Used only when necessary in Montering av kretskort

Parylene removal chemicals

Parylen Konform beläggning is highly resistant to most chemicals.

Removal methods:

• Specialized chemical stripping agents
• Plasma etching (more common than chemicals)

Features:

• Complex and expensive process
• Typically used in high-end SMT-montering applications

Important safety considerations

When using chemicals to remove Konform beläggning:

• Work in well-ventilated areas
• Use proper PPE (gloves, goggles)
• Avoid prolonged exposure to solvents
• Test on a small area first to prevent PCB damage

Alternative removal methods

In addition to chemicals, other methods may be used:

• Mechanical removal (scraping, micro-tools)
• Thermal removal (heat softening)
• Laser or plasma removal (high precision)

These are often combined with chemical methods in Montering av kretskort rework.

Slutlig slutsats

Different Konform beläggning materials require different removal chemicals. Acrylic coatings are the easiest to remove with common solvents, while silicone, polyurethane, epoxy, and parylene require stronger or specialized methods. In Montering av kretskort och SMT-montering, selecting the correct removal approach ensures safe and effective rework without damaging the PCB.

Få en offert på Conformal Coating

Säkerställ långsiktig tillförlitlighet för dina kretskort med våra beläggningslösningar. Börja här.
Skicka oss dina krav och få ett snabbt svar från vårt ingenjörsteam.

✔ Svar 24 timmar om dygnet ✔ Teknisk support ✔ Små- och massproduktion

Aktivera JavaScript i din webbläsare för att fylla i detta formulär.

Preferred Material Name

Namn *

E-post *

WhatsAPP

Rekommenderat material

• Akryl (AR)
• Silikon (SR)
• Polyuretan (UR)
• UV-härdbar - UV
• Jag är inte säker / Behöver råd

Filuppladdning

Dra och släpp filer,, Välj filer att ladda upp Du kan ladda upp upp till 8-filer.

Komprimera alla Gerber-filer, Drill-filer och BOM till en enda ZIP- eller RAR-fil för snabbare bearbetning.

Meddelande

"Please list components or areas that must NOT be coated (e.g., connectors, test points)." If you have specific coating material requirements (e.g., HumiSeal), Please indicate this in the comment box.

Skicka in

Shenzhen Tengxinjie Electronics Co, Ltd.