Types of coatings does HumiSeal offer

HumiSeal conformal coating, produced by Chase Corporation, offers one of the widest ranges of coating chemistries in the industry. These coatings are widely used in Montering av kretskort, SMT-montering, och Nyckelfärdig PCB-montering to meet different environmental and performance requirements.

Below are the main types of coatings HumiSeal provides:

Acrylic conformal coatings (AR)

• Fast drying and easy to apply
• Excellent moisture protection
• Lätt att omarbeta och reparera
• Cost-effective for general electronics

Typical example: HumiSeal 1B31
These are among the most commonly used coatings in Montering av kretskort.

Urethane (polyurethane) coatings (UR)

• High resistance to chemicals and solvents
• Strong mechanical durability
• Good moisture and abrasion resistance
• More difficult to remove

Used in harsh industrial environments and demanding SMT-montering applikationer.

Silicone conformal coatings (SR)

• Excellent high-temperature performance
• Flexible and resistant to thermal cycling
• Good moisture and environmental protection
• Suitable for automotive and aerospace

Common examples include HumiSeal 1C49 and 1C51.

Epoxy conformal coatings (ER)

• Very hard and durable
• Excellent chemical and environmental resistance
• Stark vidhäftning
• Difficult to rework or remove

Typically used in high-reliability Nyckelfärdig PCB-montering where long-term protection is critical.

UV-curable conformal coatings

• Cure rapidly under UV light
• Ideal for high-speed automated production
• Improve efficiency in mass SMT-montering
• Often combined with secondary moisture cure

Widely used in modern inline coating processes.

Water-based and low-VOC coatings

• Miljövänlig
• Reduced emissions (RoHS compliant)
• Suitable for green manufacturing requirements

These are increasingly adopted in global Montering av kretskort operationer.

Synthetic rubber coatings

• Good flexibility and moisture resistance
• Moderate chemical protection
• Used in specific industrial applications

Listed among HumiSeal product categories.

Why HumiSeal offers multiple coating types

Different applications require different properties:

• Consumer electronics → acrylic (low cost, easy rework)
• Automotive → silicone (temperature resistance)
• Industrial → urethane (chemical resistance)
• Aerospace → epoxy or silicone (high reliability)
• High-speed production → UV-curable coatings

This variety allows manufacturers to optimize protection in Nyckelfärdig PCB-montering.

Slutsats

HumiSeal offers a full spectrum of Konform beläggning types, including acrylic, urethane, silicone, epoxy, UV-curable, and specialty coatings. In Montering av kretskort, SMT-montering, och Nyckelfärdig PCB-montering, this wide range ensures that the right coating can be selected for any environment, performance requirement, or production process.

Få en offert på Conformal Coating

Från SMT-montering till konform beläggning, vi erbjuder one-stop-lösningar. Få en offert nu.
Skicka oss dina krav och få ett snabbt svar från vårt ingenjörsteam.

✔ Svar 24 timmar om dygnet ✔ Teknisk support ✔ Små- och massproduktion

Aktivera JavaScript i din webbläsare för att fylla i detta formulär.

Namn *

E-post *

Layout Material Name

WhatsAPP

Rekommenderat material

• Akryl (AR)
• Silikon (SR)
• Polyuretan (UR)
• UV-härdbar - UV
• Jag är inte säker / Behöver råd

Filuppladdning

Dra och släpp filer,, Välj filer att ladda upp Du kan ladda upp upp till 8-filer.

Komprimera alla Gerber-filer, Drill-filer och BOM till en enda ZIP- eller RAR-fil för snabbare bearbetning.

Meddelande

"Ange komponenter eller områden som INTE får beläggas (t.ex. kontakter, testpunkter)." Om du har specifika krav på beläggningsmaterial (t.ex. HumiSeal), ange detta i kommentarsfältet.

Skicka in

Shenzhen Tengxinjie Electronics Co, Ltd.