Konform beläggning applied

I Montering av kretskort och SMT-montering, Konform beläggning is applied to protect electronic circuits from moisture, dust, chemicals, and environmental stress. The application method depends on production volume, board complexity, and performance requirements.

Surface preparation before coating

Before applying Konform beläggning, proper preparation is critical:

• Rengöring: Remove flux residues, dust, and oils
• Drying: Ensure no moisture remains on the PCB
• Masking: Protect connectors, test points, and components that must not be coated

Good preparation ensures strong adhesion and reliable performance in Montering av kretskort.

Main application methods

Spraybeläggning

Spray coating is the most widely used method i SMT-montering, especially for medium to high-volume production.

Features:

• Can be manual (spray gun) or automated (selective coating machines)
• Tillhandahåller uniform coverage
• Suitable for complex PCB designs

Selective spray systems are commonly used in automated Montering av kretskort lines for precision coating.

Doppbeläggning

Dip coating involves immersing the entire PCB into the coating material.

Features:

• Ensures complete coverage, including hard-to-reach areas
• Ideal for simple board designs
• High efficiency for batch production

However, masking is essential to prevent unwanted areas from being coated.

Beläggning med pensel

Brush coating is a manual method used for small-scale production or rework.

Features:

• Low cost and simple
• Suitable for repair or touch-up
• Not ideal for large-scale SMT-montering

It depends heavily on operator skill and may result in uneven thickness.

Selective coating (automated)

Selective coating is an advanced automated process widely used in modern Montering av kretskort.

Features:

• High precision → only coats required areas
• Reduces masking requirements
• Improves consistency and repeatability
• Ideal for high-volume manufacturing

This method is commonly used in automotive and industrial electronics.

Vapor deposition (parylene coating)

Used specifically for parylene Konform beläggning, this process deposits coating in a vacuum chamber.

Features:

• Creates a uniform, pinhole-free layer
• Excellent coverage under components
• High reliability for critical applications

It is typically used in aerospace, medical, and high-end electronics.

Curing process

After application, Konform beläggning must be cured to achieve its final properties:

• Air drying (common for acrylic)
• Heat curing (epoxy, polyurethane)
• UV curing (fast production in SMT lines)
• Moisture curing (some silicone coatings)

The curing method affects production speed and coating performance.

Key factors affecting application

• Viscosity of coating material
• Board complexity and component density
• Required thickness and coverage
• Production volume and automation level

Selecting the right method ensures consistent quality in Montering av kretskort.

Slutlig slutsats

Konform beläggning can be applied using spray, dip, brush, selective coating, or vapor deposition methods. In modern SMT-montering, selective spray coating is the most common approach, offering a balance of precision, efficiency, and scalability. Proper preparation and curing are essential to ensure long-term protection and reliability of electronic product

Få en offert på Conformal Coating

Behöver du konform beläggning för applikationer i tuffa miljöer? Skicka in din förfrågan nedan.
Skicka oss dina krav och få ett snabbt svar från vårt ingenjörsteam.

✔ Svar 24 timmar om dygnet ✔ Teknisk support ✔ Små- och massproduktion

Aktivera JavaScript i din webbläsare för att fylla i detta formulär.

Namn

E-post *

WhatsAPP

Rekommenderat material

• Akryl (AR)
• Silikon (SR)
• Polyuretan (UR)
• UV-härdbar - UV
• Jag är inte säker / Behöver råd

Filuppladdning

Dra och släpp filer,, Välj filer att ladda upp Du kan ladda upp upp till 8-filer.

Komprimera alla Gerber-filer, Drill-filer och BOM till en enda ZIP- eller RAR-fil för snabbare bearbetning.

WhatsAPP upload Message

Meddelande

"Ange komponenter eller områden som INTE får beläggas (t.ex. kontakter, testpunkter)." Om du har specifika krav på beläggningsmaterial (t.ex. HumiSeal), vänligen ange det i meddelanderutan nedan.

Skicka in

Shenzhen Tengxinjie Electronics Co, Ltd.