DIP coating PCB

Dip coating is a widely used method for applying Konform beläggning to printed circuit boards during Montering av kretskort och SMT-montering. In this process, the entire PCB is immersed (or “dipped”) into a liquid coating material and then withdrawn, leaving a uniform protective layer on all exposed surfaces.

This technique is especially effective for achieving full coverage, including hard-to-reach areas beneath components.

How dip coating works

During dip coating, a fully assembled PCB is lowered into a tank containing liquid Konform beläggning material. After a controlled immersion time, the board is slowly withdrawn at a consistent speed. As it is removed, excess coating drains off, and the remaining film cures to form a protective layer.

The final coating thickness depends on factors such as withdrawal speed, viscosity of the coating material, and environmental conditions.

Advantages of dip coating

Complete coverage
Dip coating ensures that all surfaces of the PCB, including complex geometries and densely populated areas typical in SMT-montering, are thoroughly coated.

Consistency
Because the entire board is immersed, dip coating provides highly uniform results across multiple boards in Montering av kretskort production.

Efficiency for batch processing
This method is ideal for high-volume manufacturing where many boards can be coated in sequence.

Good penetration
It allows coating material to reach tight spaces under components where spray methods might struggle.

Limitations to consider

Masking requirements
Areas such as connectors, switches, and test points must be masked before dipping to prevent unwanted coating.

Material waste
Compared to selective coating methods, dip coating may result in higher material usage.

Thickness control
It can be more challenging to precisely control coating thickness compared to automated spray or selective coating.

Not suitable for all designs
Very delicate components or assemblies with trapped air pockets may not be ideal for dip coating.

Applications in Montering av kretskort och SMT-montering

Dip coating is commonly used in applications where full environmental protection is required, such as industrial electronics, power supplies, and automotive modules. It is particularly beneficial when uniform and thorough Konform beläggning coverage is critical.

Slutsats

Dip coating is a reliable and efficient method for applying Konform beläggning in Montering av kretskort och SMT-montering. By immersing the entire board, it ensures complete and consistent protection against moisture, contaminants, and environmental stress, making it a preferred choice for many high-reliability applications.

Få en offert på Conformal Coating

Working on automotive, industrial, or outdoor electronics? We can help with conformal coating.
Send us your requirements and get a fast response from our engineering team.

✔ 24-hour response    ✔ Engineering support    ✔ Small & Mass Production

Aktivera JavaScript i din webbläsare för att fylla i detta formulär.

Namn

E-post *

WhatsAPP

Rekommenderat material

• Akryl (AR)
• Silikon (SR)
• Polyuretan (UR)
• UV-härdbar - UV
• Jag är inte säker / Behöver råd

Name File WhatsAPP

Filuppladdning

Dra och släpp filer,, Välj filer att ladda upp Du kan ladda upp upp till 8-filer.

Komprimera alla Gerber-filer, Drill-filer och BOM till en enda ZIP- eller RAR-fil för snabbare bearbetning.

Meddelande

"Ange komponenter eller områden som INTE får beläggas (t.ex. kontakter, testpunkter)." Om du har specifika krav på beläggningsmaterial (t.ex. HumiSeal), vänligen ange det i meddelanderutan nedan.

Skicka in

Shenzhen Tengxinjie Electronics Co, Ltd.