Coating is used in aerospace PCBs

Aerospace electronics operate in some of the harshest environments—extreme temperatures, rapid pressure changes, vibration, and exposure to moisture or contaminants. Because of these conditions, 保形塗層 is essential in aerospace PCB 組裝 和 SMT 組裝 to ensure long-term reliability and safety.

Most commonly used coatings in aerospace

There is no single universal coating, but the following types are most widely used in aerospace 交鑰匙 PCB 組裝:

Parylene coating (top choice for critical systems)
Parylene is often considered the gold standard for aerospace applications.

• Ultra-thin, uniform, and pinhole-free coating (via vapor deposition)
• Excellent dielectric strength for high-reliability circuits
• Superior moisture and chemical resistance
• Performs well in extreme temperatures and vacuum conditions

Because of its reliability, parylene is commonly used in satellites, avionics, and mission-critical systems. The main drawback is its high cost and complex processing.

Silicone conformal coating (widely used)
矽膠 保形塗層 is another popular choice in aerospace PCB 組裝.

• Excellent thermal stability (wide temperature range)
• Flexible → withstands vibration and thermal cycling
• Good moisture resistance
• Strong performance in high-altitude environments

Silicone is often used in avionics, control systems, and power electronics where flexibility and temperature resistance are important.

Polyurethane coating (for chemical resistance)
Polyurethane coatings are used when chemical exposure is a concern.

• Good dielectric strength
• Strong resistance to fuels, solvents, and chemicals
• Durable in harsh industrial-like aerospace environments

However, they are less flexible than silicone and harder to rework.

Epoxy coating (for mechanical durability)
環氧樹脂 保形塗層 is sometimes used for:

• 高機械強度
• Excellent adhesion and environmental resistance

But it is rigid, which makes it less suitable for applications with high vibration or thermal cycling.

Why aerospace requires advanced coatings

In aerospace SMT 組裝, coatings must address:

• Extreme temperature fluctuations (from very low to very high)
• Low pressure and vacuum conditions
• High vibration and mechanical stress
• Moisture and condensation during ground operations
• Long service life with minimal maintenance

保形塗層 helps prevent corrosion, electrical leakage, and failure under these demanding conditions.

Standards and quality requirements

Aerospace coatings typically need to meet strict industry standards, such as:

• IPC-CC-830 (qualification and performance of coatings)
• MIL-I-46058 (military specification, now largely replaced but still referenced)

These standards are often required in certified 交鑰匙 PCB 組裝 processes for aerospace customers.

總結

The most commonly used coatings in aerospace PCBs are 聚二甲苯 和 silicone conformal coatings, with polyurethane and epoxy used in specific cases. In high-reliability PCB 組裝, SMT 組裝, 以及 交鑰匙 PCB 組裝, coating selection depends on environmental conditions, mechanical stress, and performance requirements. For mission-critical aerospace systems, reliability always outweighs cost.

取得保形塗層報價

對 PCB 的保形塗層有疑問？我們的工程師已準備好提供協助。.
將您的需求傳送給我們，並獲得我們工程團隊的快速回應。.

24 小時回應 ✔ 工程支援 ✔ 小型與大量生產

請啟用瀏覽器的 JavaScript，以完成此表格。.

名稱

電子郵件 *

WhatsAPP

首選材料

• 壓克力 (AR)
• 矽膠 (SR)
• 聚氨酯 (UR)
• 紫外線可固化 - UV
• 我不確定 / 需要建議

檔案上傳

拖放檔案、, 選擇要上傳的檔案 您最多可以上傳 8 檔案。.

請將所有 Gerber 檔案、Drill 檔案和 BOM 壓縮為單一的 .ZIP 或 .RAR 檔案，以加快處理速度。.

upload WhatsAPP Preferred

訊息

"「請列出不得塗覆的元件或區域（例如：連接器、測試點）」。如果您有特定的塗層材料要求（例如 HumiSeal），請在下面的訊息框中提及。.

提交

深圳市騰欣杰電子有限公司