Export Gerber files from Eagle

Exporting Gerber files from Autodesk Eagle is a key step before starting Производство печатных плат и Сборка печатной платы. Gerber files contain all the necessary data for fabricating your PCB, including copper layers, solder mask, silkscreen, and drill information.

Below is a step-by-step guide to help you correctly generate Gerber files for Сборка SMT и производство.

Open your PCB design

Start by opening your completed board file (.brd) in Autodesk Eagle. Make sure your design is finalized and all components are properly placed and routed.

It’s recommended to run a Design Rule Check (DRC) before exporting to ensure there are no layout errors that could affect Сборка печатной платы.

Получить цитату Сборка печатной платы

Open the CAM processor

In the top menu, go to
File → CAM Processor

The CAM Processor is the tool used to generate Gerber files for Производство печатных плат. It allows you to select layers and configure output settings.

Load a CAM job file

Eagle usually includes default CAM job files.

Click File → Open → Job, then select a standard job such as:
gerber.cam

This will automatically load predefined settings for common Gerber outputs, suitable for most Сборка печатной платы требования.

Configure Gerber layers

Ensure the correct layers are selected for export. Typical layers include:

• Top Copper (Top)
• Bottom Copper (Bottom)
• Solder Mask Top/Bottom
• Silkscreen Top/Bottom
• Board Outline (Dimension layer)

Для Сборка SMT, accurate solder mask and silkscreen layers are especially important.

Set output format

Make sure the output format is set correctly:

• Format: RS-274X (standard Gerber format)
• Units: mm or inch (match your design settings)
• Resolution: usually 2:5 or 2:6

These settings ensure compatibility with most Производство печатных плат suppliers.

Generate Gerber files

Click the Process Job button.

Eagle will generate a set of Gerber files, typically including:

• .GTL (Top Layer)
• .GBL (Bottom Layer)
• .GTS / .GBS (Solder Mask)
• .GTO / .GBO (Silkscreen)
• .GKO or .GML (Board Outline)

These files are essential for both fabrication and Сборка печатной платы.

Export drill files

Gerber files do not include drill data, so you must export it separately.

Go to:
File → CAM Processor → Drill data (Excellon format)

This file contains hole sizes and locations, which are critical for Производство печатных плат.

Verify Gerber files

Before sending files to your manufacturer, always verify them using a Gerber viewer.

Check that:

• All layers are aligned correctly
• Board outline is accurate
• No missing pads or traces
• Text and markings appear properly

This step helps prevent costly errors in Сборка печатной платы.

Package files for submission

Finally, compress all Gerber and drill files into a single ZIP archive.

Include:

• Файлы Gerber
• Drill file
• Readme or notes (if needed)

You can now send this package to your Производство печатных плат или Сборка печатной платы supplier for quotation and production.

Заключение

Exporting Gerber files from Autodesk Eagle is a straightforward process when using the CAM Processor with the correct settings. Proper file preparation ensures smooth Сборка SMT, reduces manufacturing errors, and speeds up your project timeline.

Получить цитату Сборка печатной платы

Ищете надежное решение для сборки печатных плат? Нажмите ниже, чтобы запросить цену прямо сейчас.
Мы предоставляем профессиональные услуги по сборке печатных плат, включая SMT, DIP и полные решения "под ключ".

✔ NDA доступно ✔ Быстрая котировка в течение 24 часов ✔ ISO сертифицированный завод ✔ Одна остановка PCB & PCBA службы