Export Gerber files from Eagle

Exporting Gerber files from Autodesk Eagle is a key step before starting Produzione di PCB e Assemblaggio di PCB. Gerber files contain all the necessary data for fabricating your PCB, including copper layers, solder mask, silkscreen, and drill information.

Below is a step-by-step guide to help you correctly generate Gerber files for Assemblaggio SMT e produzione.

Open your PCB design

Start by opening your completed board file (.brd) in Autodesk Eagle. Make sure your design is finalized and all components are properly placed and routed.

It’s recommended to run a Design Rule Check (DRC) before exporting to ensure there are no layout errors that could affect Assemblaggio di PCB.

Richiedete un preventivo per l'assemblaggio di PCB

Open the CAM processor

In the top menu, go to
File → CAM Processor

The CAM Processor is the tool used to generate Gerber files for Produzione di PCB. It allows you to select layers and configure output settings.

Load a CAM job file

Eagle usually includes default CAM job files.

Click File → Open → Job, then select a standard job such as:
gerber.cam

This will automatically load predefined settings for common Gerber outputs, suitable for most Assemblaggio di PCB requisiti.

Configure Gerber layers

Ensure the correct layers are selected for export. Typical layers include:

• Top Copper (Top)
• Bottom Copper (Bottom)
• Solder Mask Top/Bottom
• Silkscreen Top/Bottom
• Board Outline (Dimension layer)

Per Assemblaggio SMT, accurate solder mask and silkscreen layers are especially important.

Set output format

Make sure the output format is set correctly:

• Format: RS-274X (standard Gerber format)
• Units: mm or inch (match your design settings)
• Resolution: usually 2:5 or 2:6

These settings ensure compatibility with most Produzione di PCB suppliers.

Generate Gerber files

Click the Process Job button.

Eagle will generate a set of Gerber files, typically including:

• .GTL (Top Layer)
• .GBL (Bottom Layer)
• .GTS / .GBS (Solder Mask)
• .GTO / .GBO (Silkscreen)
• .GKO or .GML (Board Outline)

These files are essential for both fabrication and Assemblaggio di PCB.

Export drill files

Gerber files do not include drill data, so you must export it separately.

Go to:
File → CAM Processor → Drill data (Excellon format)

This file contains hole sizes and locations, which are critical for Produzione di PCB.

Verify Gerber files

Before sending files to your manufacturer, always verify them using a Gerber viewer.

Check that:

• All layers are aligned correctly
• Board outline is accurate
• No missing pads or traces
• Text and markings appear properly

This step helps prevent costly errors in Assemblaggio di PCB.

Package files for submission

Finally, compress all Gerber and drill files into a single ZIP archive.

Include:

• File Gerber
• Drill file
• Readme or notes (if needed)

You can now send this package to your Produzione di PCB o Assemblaggio di PCB supplier for quotation and production.

Conclusione

Exporting Gerber files from Autodesk Eagle is a straightforward process when using the CAM Processor with the correct settings. Proper file preparation ensures smooth Assemblaggio SMT, reduces manufacturing errors, and speeds up your project timeline.

Richiedete un preventivo per l'assemblaggio di PCB

Cercate una soluzione affidabile per l'assemblaggio di PCB? Fate clic qui sotto per richiedere subito un preventivo.
Forniamo servizi professionali di assemblaggio di PCB, tra cui SMT, DIP e soluzioni complete chiavi in mano.

✔ NDA disponibile ✔ Preventivo veloce entro 24 ore ✔ Fabbrica certificata ISO ✔ Servizio unico per PCB e PCBA