Prepare PCB for Beläggning

Proper preparation is essential before applying Konform beläggning i Montering av kretskort och SMT-montering. A well-prepared PCB ensures strong adhesion, uniform coverage, and long-term protection against environmental factors.

Initial inspection

Before any preparation, the PCB should be carefully inspected.

• Check for solder defects, loose components, or damage
• Ensure all assembly processes are completed
• Verify there are no visible contaminants

Defects should be corrected before coating, as rework becomes more difficult after Konform beläggning.

Cleaning the PCB

Cleaning is the most critical preparation step.

• Remove flux residues, oils, dust, and fingerprints
• Use solvent cleaning, aqueous cleaning, or ultrasonic cleaning
• Ensure the surface is completely free of contaminants

A clean surface is essential for proper adhesion in Montering av kretskort.

Rinsing (if required)

For aqueous cleaning processes:

• Rinse thoroughly with deionized (DI) water
• Remove any remaining cleaning agents or residues

Improper rinsing can leave ionic contamination that affects coating performance.

Drying and moisture removal

After cleaning, the PCB must be completely dry.

• Use hot air ovens, vacuum drying, or air drying
• Eliminate moisture trapped under components

Moisture can cause bubbling, poor adhesion, or corrosion under the Konform beläggning.

Masking sensitive areas

Masking protects areas that should not be coated.

• Connectors, switches, relays, test points
• Use masking tapes, plugs, or custom fixtures

Proper masking ensures functionality is maintained after coating in SMT-montering.

Surface activation (optional)

In some cases, surface treatment is used to improve coating adhesion.

• Plasma treatment or corona treatment
• Enhances bonding for difficult surfaces

This step is often used in high-reliability Montering av kretskort applikationer.

Pre-heating (optional)

Pre-heating the PCB before coating can improve results.

• Reduces moisture and viscosity issues
• Helps coating flow evenly
• Minimizes bubbles and defects

This is especially useful in automated SMT-montering processer.

Final inspection before coating

Before applying Konform beläggning, perform a final check:

• Ensure PCB is clean and dry
• Confirm masking is correctly applied
• Verify no foreign particles are present

This step ensures readiness for a successful coating process.

Slutlig slutsats

Preparing a PCB for Konform beläggning involves inspection, cleaning, drying, masking, and optional surface treatments. In Montering av kretskort och SMT-montering, proper preparation is the foundation for achieving reliable coating performance, preventing defects, and ensuring long-term protection of electronic products.

Få en offert på Conformal Coating

Planerar du ett nytt PCBA-projekt med krav på ytbehandling? Begär en snabb offert nedan.
Skicka oss dina krav och få ett snabbt svar från vårt ingenjörsteam.

✔ Svar 24 timmar om dygnet ✔ Teknisk support ✔ Små- och massproduktion

Aktivera JavaScript i din webbläsare för att fylla i detta formulär.

Namn

E-post *

WhatsAPP

Rekommenderat material

• Akryl (AR)
• Silikon (SR)
• Polyuretan (UR)
• UV-härdbar - UV
• Jag är inte säker / Behöver råd

Namn E-post Meddelande

Filuppladdning

Dra och släpp filer,, Välj filer att ladda upp Du kan ladda upp upp till 8-filer.

Komprimera alla Gerber-filer, Drill-filer och BOM till en enda ZIP- eller RAR-fil för snabbare bearbetning.

Meddelande

"Ange komponenter eller områden som INTE får beläggas (t.ex. kontakter, testpunkter)." Om du har specifika krav på beläggningsmaterial (t.ex. HumiSeal), vänligen ange det i meddelanderutan nedan.

Skicka in

Shenzhen Tengxinjie Electronics Co, Ltd.