Coating thickness measurement method

Coating thickness measurement is the process of determining the thickness of Revestimento conformacional applied on a PCB in Montagem de PCB e Montagem SMT. Proper thickness is critical to ensure effective protection without interfering with electrical performance or component functionality.

Why thickness measurement is important

The thickness of Revestimento conformacional directly affects its performance.

If too thin:

• Insufficient protection against moisture and contaminants
• Reduced insulation performance

If too thick:

• Risk of cracking or delamination
• Potential interference with connectors or moving parts

Accurate measurement ensures optimal coating quality in Montagem de PCB.

Common coating thickness measurement methods

Wet film thickness measurement

This method is used immediately after coating application before curing.

How it works:

• A wet film gauge is placed on the coated surface
• The thickness is determined based on contact points

Advantages:

• Quick and simple
• Helps adjust process parameters in real time

Limitações:

• Only applicable before curing
• Less precise than dry measurement

Dry film thickness measurement

Performed after the coating has cured, this is the most widely used method in Montagem SMT.

Methods include:

Micrometer measurement

• Measures total thickness before and after coating
• Calculates coating thickness by difference

Ultrasonic thickness measurement

• Uses sound waves to measure coating thickness
• Non-destructive and accurate

Eddy current method

• Used for conductive substrates
• Measures thickness based on electromagnetic response

Cross-section measurement

How it works:

• PCB is cut to expose a cross-section
• Thickness is measured under a microscope

Advantages:

• Very accurate
• Useful for process validation

Disadvantages:

• Destructive method
• Not suitable for routine inspection

Optical measurement methods

Advanced Montagem de PCB processes may use optical systems:

• Laser measurement
• Digital microscopy
• Automated inspection systems

These provide high precision and are suitable for automated Montagem SMT lines.

Typical coating thickness ranges

Depending on the coating type:

• Acrylic: 25–75 microns
• Silicone: 50–200 microns
• Polyurethane: 25–100 microns
• Epoxy: 25–100 microns

Maintaining the correct range ensures reliable Revestimento conformacional performance.

Factors affecting thickness

• Coating method (spray, dip, brush, selective)
• Viscosity of coating material
• Application speed and pressure
• Environmental conditions

These must be controlled in Montagem SMT processos.

Conclusão final

Coating thickness measurement is a vital quality control step in Montagem de PCB e Montagem SMT. By using appropriate methods such as wet film gauges, ultrasonic testing, and cross-section analysis, manufacturers can ensure that Revestimento conformacional meets performance and reliability requirements.

Obter uma cotação de revestimento isolante

Tem requisitos especiais de revestimento? Envie-nos seus arquivos de PCB para avaliação.
Envie-nos seus requisitos e receba uma resposta rápida de nossa equipe de engenharia.

Resposta 24 horas ✔ Suporte de engenharia ✔ Produção pequena e em massa

Ative o JavaScript em seu navegador para preencher este formulário.

Arquivo Mensagem E-mail

Nome *

E-mail *

WhatsAPP

Material preferido

• Acrílico (AR)
• Silicone (SR)
• Poliuretano (UR)
• Curável por UV - UV
• Não tenho certeza / Preciso de orientação

Upload de arquivos

Arrastar e soltar arquivos,, Escolha os arquivos para upload Você pode carregar até 8 arquivos.

Para um processamento mais rápido, compacte todos os arquivos Gerber, arquivos Drill e BOM em um único arquivo .ZIP ou .RAR.

Mensagem

"Please list components or areas that must NOT be coated (e.g., connectors, test points)." If you have specific coating material requirements (e.g., HumiSeal), Please indicate this in the comment box.

Enviar

Shenzhen Tengxinjie Electronics Co., Ltd.