DIP coating PCB

Dip coating is a widely used method for applying Конформное покрытие to printed circuit boards during Сборка печатной платы и Сборка SMT. In this process, the entire PCB is immersed (or “dipped”) into a liquid coating material and then withdrawn, leaving a uniform protective layer on all exposed surfaces.

This technique is especially effective for achieving full coverage, including hard-to-reach areas beneath components.

How dip coating works

During dip coating, a fully assembled PCB is lowered into a tank containing liquid Конформное покрытие material. After a controlled immersion time, the board is slowly withdrawn at a consistent speed. As it is removed, excess coating drains off, and the remaining film cures to form a protective layer.

The final coating thickness depends on factors such as withdrawal speed, viscosity of the coating material, and environmental conditions.

Advantages of dip coating

Complete coverage
Dip coating ensures that all surfaces of the PCB, including complex geometries and densely populated areas typical in Сборка SMT, are thoroughly coated.

Consistency
Because the entire board is immersed, dip coating provides highly uniform results across multiple boards in Сборка печатной платы production.

Efficiency for batch processing
This method is ideal for high-volume manufacturing where many boards can be coated in sequence.

Good penetration
It allows coating material to reach tight spaces under components where spray methods might struggle.

Limitations to consider

Masking requirements
Areas such as connectors, switches, and test points must be masked before dipping to prevent unwanted coating.

Material waste
Compared to selective coating methods, dip coating may result in higher material usage.

Thickness control
It can be more challenging to precisely control coating thickness compared to automated spray or selective coating.

Not suitable for all designs
Very delicate components or assemblies with trapped air pockets may not be ideal for dip coating.

Applications in Сборка печатной платы и Сборка SMT

Dip coating is commonly used in applications where full environmental protection is required, such as industrial electronics, power supplies, and automotive modules. It is particularly beneficial when uniform and thorough Конформное покрытие coverage is critical.

Заключение

Dip coating is a reliable and efficient method for applying Конформное покрытие in Сборка печатной платы и Сборка SMT. By immersing the entire board, it ensures complete and consistent protection against moisture, contaminants, and environmental stress, making it a preferred choice for many high-reliability applications.

Получить цитату о конформном покрытии

Working on automotive, industrial, or outdoor electronics? We can help with conformal coating.
Send us your requirements and get a fast response from our engineering team.

✔ 24-hour response    ✔ Engineering support    ✔ Small & Mass Production

Для заполнения данной формы включите JavaScript в браузере.

Имя

Name Message upload

Электронная почта *

WhatsAPP

Предпочтительный материал

• Акрил (AR)
• Силикон (SR)
• Полиуретан (UR)
• УФ-отверждаемые - УФ
• Я не уверен / Нужен совет

Загрузка файлов

Перетаскивание файлов,, Выберите файлы для загрузки Вы можете загрузить до 8 файлов.

Пожалуйста, сожмите все файлы Gerber, Drill и BOM в один файл .ZIP или .RAR для ускорения обработки.

Сообщение

"Пожалуйста, перечислите компоненты или области, которые НЕ должны покрываться (например, разъемы, контрольные точки)". Если у вас есть особые требования к материалу покрытия (например, HumiSeal), укажите их в поле для сообщений ниже.

Отправить

Shenzhen Tengxinjie Electronics Co., Ltd.