Avoid contamination during coating

Contamination during Conforme coating can lead to serious defects such as poor adhesion, bubbles, pinholes, and electrical leakage. In PCB-assemblage, Prototype PCB-assemblage, en SMT-assemblage, preventing contamination is critical to ensure coating reliability and long-term product performance.

Ensure proper PCB cleaning before coating
The most important step is removing all residues from the PCB surface. Flux residues, oils, dust, and fingerprints can interfere with coating adhesion. In PCB-assemblage, use appropriate cleaning methods (aqueous or solvent cleaning) followed by thorough drying to eliminate moisture.

Control the production environment
A clean environment is essential during coating. Dust, airborne particles, and humidity can contaminate the coating surface. In SMT-assemblage, coating is often performed in controlled areas with:

• Air filtration systems
• Positive air pressure
• Stable temperature and humidity

Handle PCBs correctly
Operators should avoid direct contact with PCB surfaces. Wearing gloves and using proper handling tools prevents contamination from skin oils or dirt, especially in Prototype PCB-assemblage where manual handling is more common.

Use clean and well-maintained equipment
Spray nozzles, coating tanks, and dispensing systems must be regularly cleaned. Residue buildup or contamination in equipment can transfer directly to the PCB during Conforme coating.

Filter and store coating materials properly
Coating materials should be stored in sealed containers and used within their shelf life. Filtering the coating before use helps remove particles that could cause defects in PCB-assemblage.

Control masking processes
Improper masking can introduce contaminants such as adhesive residues. Use high-quality masking materials and ensure they are clean and compatible with the coating process.

Avoid moisture contamination
Moisture is a major source of defects. PCBs and components should be stored in dry conditions and, if necessary, baked before coating. In SMT-assemblage, moisture control is especially important for preventing outgassing and bubbles.

Implement proper workflow and segregation
Separate coating areas from soldering, machining, or other processes that generate dust and contaminants. A dedicated coating zone improves cleanliness in PCB-assemblage lines.

Perform inspection before and after coating
Pre-coating inspection ensures the PCB is clean and ready. Post-coating inspection (often using UV light) helps detect contamination-related defects early in Prototype PCB-assemblage and production.

Train operators and enforce SOPs
Well-trained personnel and standardized procedures reduce the risk of contamination caused by human error.

Common contamination sources to avoid

• Flux residues and solder byproducts
• Dust and airborne particles
• Oils and fingerprints
• Moisture and condensation
• Dirty equipment or containers

In conclusion, avoiding contamination in Conforme coating requires strict control of cleaning, environment, handling, materials, and equipment. By implementing these best practices in PCB-assemblage, SMT-assemblage, en Prototype PCB-assemblage, manufacturers can significantly reduce defects and ensure high-quality, reliable coating performance.

Vraag een offerte aan voor conforme coating

Weet u niet zeker welke conformal coating geschikt is voor uw product? Neem vandaag nog contact op met onze experts.
Stuur ons je vereisten en krijg snel antwoord van ons engineeringteam.

✔ 24-uurs respons ✔ Engineering-ondersteuning ✔ Kleine & massaproductie

Schakel JavaScript in uw browser in om dit formulier in te vullen.

E-mail Bestandsbericht

Naam *

E-mail *

WhatsAPP

Aanbevolen materiaal

• Acryl (AR)
• Silicone (SR)
• Polyurethaan (UR)
• UV-uithardbaar - UV
• Ik weet het niet zeker / Heb advies nodig

Bestanden uploaden

Bestanden slepen en neerzetten,, Bestanden kiezen om te uploaden U kunt maximaal 8 bestanden uploaden.

Comprimeer alle Gerber-bestanden, boorbestanden en BOM in een enkel .ZIP- of .RAR-bestand voor snellere verwerking.

Bericht

"Please list components or areas that must NOT be coated (e.g., connectors, test points)." If you have specific coating material requirements (e.g., HumiSeal), Please indicate this in the comment box.

Stuur in

Shenzhen Tengxinjie Electronics Co, Ltd.