Difference between HumiSeal 1B31 and 1A33

HumiSeal 1B31 en 1A33 are two widely used Conforme coating materials in PCB-assemblage, Prototype PCB-assemblage, en SMT-assemblage, but they differ significantly in chemical type, performance, and application scenarios.

Understanding these differences helps manufacturers choose the right coating based on environment, cost, and reliability requirements.

Key difference: material type

The most fundamental difference is the coating chemistry:

• HumiSeal 1B31 → Acrylic coating
• HumiSeal 1A33 → Polyurethane (urethane) coating

Acrylic and polyurethane coatings have very different properties in terms of drying, durability, and resistance.

Drying and processing speed

HumiSeal 1B31 is known for its fast drying and easy processing, making it ideal for high-speed production lines in SMT-assemblage. It can become tack-free in around 10 minutes and reaches usable properties quickly

HumiSeal 1A33, on the other hand, typically requires longer curing time to achieve full performance, especially at room temperature

This means:

• 1B31 → better for fast turnaround and high throughput
• 1A33 → better for performance over speed

Chemical and environmental resistance

HumiSeal 1A33 provides much stronger chemical resistance and durability compared to 1B31. Polyurethane coatings are specifically known for resisting solvents, abrasion, and harsh environments

HumiSeal 1B31 offers good moisture protection but is less resistant to aggressive chemicals.

So:

• 1B31 → general protection (humidity, dust)
• 1A33 → harsh environments (chemicals, industrial exposure)

Herwerken en repareren

This is one of the biggest practical differences in PCB-assemblage:

• 1B31 (acrylic) → very easy to remove and rework using solvents
• 1A33 (urethane) → difficult to remove due to high chemical resistance

Voor Prototype PCB-assemblage, 1B31 is usually preferred because engineers often need to modify or repair boards.

Flexibility and mechanical performance

Both coatings offer flexibility, but their behavior differs:

• 1B31 → flexible and suitable for general applications
• 1A33 → more durable and resistant to mechanical stress, abrasion, and long-term wear

Typische toepassingen

HumiSeal 1B31 is commonly used in:

• Consumentenelektronica
• LED drivers and power supplies
• General SMT-assemblage production
• Prototype PCB-assemblage (due to easy rework)

HumiSeal 1A33 is commonly used in:

• Industrial electronics
• Automotive systems
• Aerospace and defense applications
• Harsh environments requiring chemical resistance

Cost and production considerations

• 1B31 → lower cost + faster processing
• 1A33 → higher cost + better long-term protection

For large-scale PCB-assemblage, the choice often depends on whether speed or durability is the priority.

Summary comparison

Definitief inzicht

The choice between HumiSeal 1B31 and 1A33 depends on your application:

• Kies 1B31 voor fast, cost-effective, and rework-friendly coating in PCB-assemblage en SMT-assemblage
• Kies 1A33 voor maximum durability and chemical resistance in demanding environments

In practice, many manufacturers use 1B31 for standard products en 1A33 for high-reliability or industrial applications, especially after validation in Prototype PCB-assemblage.

Vraag een offerte aan voor conforme coating

Snelle doorlooptijd nodig voor conformal coating projecten? Dien vandaag nog uw aanvraag in.
Stuur ons je vereisten en krijg snel antwoord van ons engineeringteam.

✔ 24-uurs respons ✔ Engineering-ondersteuning ✔ Kleine & massaproductie

Schakel JavaScript in uw browser in om dit formulier in te vullen.

Naam *

E-mail *

WhatsAPP

Aanbevolen materiaal

• Acryl (AR)
• Silicone (SR)
• Polyurethaan (UR)
• UV-uithardbaar - UV
• Ik weet het niet zeker / Heb advies nodig

Naam Bestand Voorkeur

Bestanden uploaden

Bestanden slepen en neerzetten,, Bestanden kiezen om te uploaden U kunt maximaal 8 bestanden uploaden.

Comprimeer alle Gerber-bestanden, boorbestanden en BOM in een enkel .ZIP- of .RAR-bestand voor snellere verwerking.

Bericht

"Vermeld onderdelen of gebieden die NIET mogen worden gecoat (bijv. connectoren, testpunten)." Als u specifieke eisen stelt aan het coatingmateriaal (bijv. HumiSeal), geef dit dan aan in het opmerkingenveld.

Stuur in

Shenzhen Tengxinjie Electronics Co, Ltd.