PCB before applying HumiSeal

Proper PCB preparation is the most critical step before applying HumiSeal conformal coating, produced by Chase Corporation. In Assemblaggio di PCB, Assemblaggio SMT, e Assemblaggio di PCB chiavi in mano, poor preparation is the leading cause of coating failure such as delamination, bubbles, or corrosion.

Remove all contaminants

After soldering, PCBs often have residues that must be eliminated:

• Flux residues (especially no-clean flux)
• Oils from handling
• Dust and particles
• Ionic contamination

Cleaning methods:

• Solvent cleaning (IPA or dedicated cleaners)
• Ultrasonic cleaning for complex assemblies
• Deionized (DI) water cleaning systems

A clean surface ensures proper adhesion of Rivestimento conforme.

Dry the PCB completely

Moisture trapped on the board can cause serious issues:

• Poor coating adhesion
• Blistering or bubbles
• Corrosione sotto il rivestimento

Best practices:

• Air dry or use compressed air
• Bake PCB at 50–80°C for 30–60 minutes if needed
• Ensure no moisture remains under components

Inspect before coating

Before coating, perform a visual and quality inspection:

• Check for solder defects (bridges, cold joints)
• Ensure no residues remain
• Verify components are properly mounted

Fixing issues after coating is much more difficult in Assemblaggio SMT.

Mask critical areas

Certain areas must not be coated:

• Connectors and edge contacts
• Test points
• Switches and mechanical interfaces

Use masking tape, boots, or removable latex to protect these zones during Assemblaggio di PCB.

Surface activation (optional but recommended)

For high-reliability applications:

• Use plasma cleaning to improve surface energy
• Enhances coating adhesion
• Common in aerospace and automotive Assemblaggio di PCB chiavi in mano

Control handling and environment

• Wear gloves to avoid fingerprints
• Work in a clean, dust-free environment
• Maintain controlled humidity and temperature

Contamination during handling can compromise coating quality.

Final readiness checklist

Before applying HumiSeal:

• PCB is clean and contamination-free
• Fully dry with no trapped moisture
• Masking is correctly applied
• Inspection is completed
• Environment is controlled

Conclusione

Preparing the PCB properly is essential for successful HumiSeal coating. In Assemblaggio di PCB, Assemblaggio SMT, e Assemblaggio di PCB chiavi in mano, thorough cleaning, drying, inspection, and masking ensure strong adhesion, reliable protection, and long-term performance.

We support HumiSeal and equivalent conformal coating solutions for your PCBA projects.

Richiedete un preventivo per il rivestimento conforme

Avete domande sul rivestimento conformale per il vostro PCB? I nostri ingegneri sono pronti ad aiutarvi.
Inviateci i vostri requisiti e riceverete una risposta rapida dal nostro team di ingegneri.

✔ Risposta in 24 ore ✔ Supporto ingegneristico ✔ Produzione di piccole dimensioni e di massa

Per completare questo modulo, abilitare JavaScript nel browser.

Nome *

Email *

WhatsAPP

File di messaggio del materiale

Materiale preferito

• Acrilico (AR)
• Silicone (SR)
• Poliuretano (UR)
• Polimerizzabile UV - UV
• Non sono sicuro / Ho bisogno di un consiglio

Caricamento dei file

Trascinamento dei file,, Scegliere i file da caricare È possibile caricare fino a 8.

Si prega di comprimere tutti i file Gerber, i file di foratura e la distinta base in un unico file .ZIP o .RAR per una più rapida elaborazione.

Messaggio

"Elencare i componenti o le aree che NON devono essere rivestite (ad esempio, connettori, punti di prova)". Se avete requisiti specifici sui materiali di rivestimento (ad esempio, HumiSeal), indicatelo nella casella dei commenti.

Invia

Shenzhen Tengxinjie Electronics Co., Ltd.