Recommended thickness for HumiSeal coating

The recommended thickness for HumiSeal conformal coating, produced by Chase Corporation, is typically 25 µm to 75 µm (microns). This range is widely accepted in PCB-assemblage, SMT-assemblage, en Turnkey PCB-assemblage to achieve optimal protection without affecting performance.

Standard thickness guidelines

• 25–50 µm → Standard protection for general electronics
• 50–75 µm → Enhanced protection for harsh environments (humidity, chemicals, vibration)

This thickness ensures good insulation, moisture resistance, and durability.

Recommended thickness by coating type

Different HumiSeal materials may require slight adjustments:

• Acrylcoatings → 25–50 µm (most common and cost-effective)
• Urethaan coatings → 30–75 µm (better chemical resistance)
• Siliconencoatings → 50–100 µm (high temperature and flexibility)
• UV-uithardende coatings → typically 25–50 µm for fast production lines

Choosing the right thickness is critical in SMT-assemblage to maintain consistency.

Why thickness control matters

Too thin coating:

• Inadequate moisture and corrosion protection
• Lower dielectric strength

Too thick coating:

• Risk of cracking or peeling
• Possible interference with connectors and components
• May impact heat dissipation

Maintaining correct thickness improves reliability in PCB-assemblage.

Hoe de laagdikte regelen

• Gebruik selective or automated spray coating systems
• Adjust viscosity and spray parameters
• Apply multiple thin layers instead of one thick layer
• Measure thickness using gauges or inspection tools

These practices are standard in Turnkey PCB-assemblage.

Industry standards reference

Typical thickness recommendations align with:

• IPC-CC-830
• Internal process specifications for conformal coating

Conclusie

The recommended HumiSeal coating thickness is 25-75 µm, depending on application and environment. In PCB-assemblage, SMT-assemblage, en Turnkey PCB-assemblage, proper thickness control ensures reliable protection, long-term durability, and optimal electrical performance.

We support HumiSeal and equivalent conforme coating solutions for your PCBA projects.

Vraag een offerte aan voor conforme coating

Hebt u speciale coatingvereisten? Stuur ons uw PCB-bestanden ter evaluatie.
Stuur ons je vereisten en krijg snel antwoord van ons engineeringteam.

✔ 24-uurs respons ✔ Engineering-ondersteuning ✔ Kleine & massaproductie

Schakel JavaScript in uw browser in om dit formulier in te vullen.

Naam *

E-mail *

WhatsAPP

Naam Bericht Voorkeur

Aanbevolen materiaal

• Acryl (AR)
• Silicone (SR)
• Polyurethaan (UR)
• UV-uithardbaar - UV
• Ik weet het niet zeker / Heb advies nodig

Bestanden uploaden

Bestanden slepen en neerzetten,, Bestanden kiezen om te uploaden U kunt maximaal 8 bestanden uploaden.

Comprimeer alle Gerber-bestanden, boorbestanden en BOM in een enkel .ZIP- of .RAR-bestand voor snellere verwerking.

Bericht

"Vermeld onderdelen of gebieden die NIET mogen worden gecoat (bijv. connectoren, testpunten)." Als u specifieke eisen stelt aan het coatingmateriaal (bijv. HumiSeal), geef dit dan aan in het opmerkingenveld.

Stuur in

Shenzhen Tengxinjie Electronics Co, Ltd.