Detect coating defects

Detecting defects in Конформное покрытие is essential to ensure reliability and performance in Сборка печатной платы и Сборка SMT. Even small coating issues can lead to moisture ingress, corrosion, or electrical failure. A combination of inspection methods is typically used in Сборка печатных плат под ключ to identify and control defects effectively.

Visual inspection (basic method)
The simplest way to detect coating defects is through visual inspection:

• Use proper lighting and magnification
• Check for uneven coating, bubbles, or missed areas
• Identify overcoating on connectors or test points

Although basic, this method is still widely used as a first step in Сборка печатной платы quality control.

UV light inspection (most common method)
Many Конформное покрытие materials include UV tracers:

• Coating glows under UV light
• Missing or thin areas appear dark
• Easy detection of coverage issues and contamination

This is one of the most efficient techniques in Сборка SMT lines for fast defect identification.

AOI (автоматизированная оптическая инспекция)
AOI systems provide automated and highly accurate detection:

• Detects insufficient or excessive coating
• Identifies bubbles, voids, and inconsistencies
• Compares results with programmed standards

AOI is commonly used in high-volume Сборка печатных плат под ключ for consistent inspection results.

Thickness measurement

Defects are not always visible—thickness control is also important:

• Use wet film gauges during application
• Use dry film measurement tools after curing
• Ensure coating falls within typical range (25–250 µm)

Incorrect thickness can lead to performance issues even if coverage looks acceptable.

Functional and electrical testing

Some coating defects only appear during operation:

• Insulation resistance testing
• High-voltage testing (for leakage or breakdown)
• Environmental stress testing (humidity, temperature)

These tests verify whether Конформное покрытие is performing correctly in real conditions.

Common coating defects to look for

• Bubbles and voids
• Cracking or peeling
• Delamination
• Shadowing (uncoated areas)
• Overcoating on critical parts
• Contamination under coating

Early detection helps reduce rework and improve yield in Сборка печатной платы.

Best practices for defect detection

• Combine multiple inspection methods (UV + AOI + visual)
• Standardize inspection criteria and procedures
• Train operators and maintain equipment
• Integrate inline inspection in Сборка SMT processes

Заключение

Detecting coating defects requires a combination of visual, UV, automated, and functional inspection methods. In Сборка печатной платы, Сборка SMT, и Сборка печатных плат под ключ, a robust inspection process ensures that Конформное покрытие is applied correctly, preventing failures and improving overall product reliability.

Получить цитату о конформном покрытии

Готовы начать свой проект по нанесению конформного покрытия? Заполните форму ниже, чтобы начать работу.
Отправьте нам свои требования и получите быстрый ответ от нашей команды инженеров.

✔ Круглосуточное реагирование ✔ Инженерная поддержка ✔ Мелкое и массовое производство

Для заполнения данной формы включите JavaScript в браузере.

Имя *

Электронная почта *

WhatsAPP

Material Message Email

Предпочтительный материал

• Акрил (AR)
• Силикон (SR)
• Полиуретан (UR)
• УФ-отверждаемые - УФ
• Я не уверен / Нужен совет

Загрузка файлов

Перетаскивание файлов,, Выберите файлы для загрузки Вы можете загрузить до 8 файлов.

Пожалуйста, сожмите все файлы Gerber, Drill и BOM в один файл .ZIP или .RAR для ускорения обработки.

Сообщение

"Please list components or areas that must NOT be coated (e.g., connectors, test points)." If you have specific coating material requirements (e.g., HumiSeal), Please indicate this in the comment box.

Отправить

Shenzhen Tengxinjie Electronics Co., Ltd.