Prepare PCB for Revestimento

Proper preparation is essential before applying Revestimento conformacional em Montagem de PCB e Montagem SMT. A well-prepared PCB ensures strong adhesion, uniform coverage, and long-term protection against environmental factors.

Initial inspection

Before any preparation, the PCB should be carefully inspected.

• Check for solder defects, loose components, or damage
• Ensure all assembly processes are completed
• Verify there are no visible contaminants

Defects should be corrected before coating, as rework becomes more difficult after Revestimento conformacional.

Cleaning the PCB

Cleaning is the most critical preparation step.

• Remove flux residues, oils, dust, and fingerprints
• Use solvent cleaning, aqueous cleaning, or ultrasonic cleaning
• Ensure the surface is completely free of contaminants

A clean surface is essential for proper adhesion in Montagem de PCB.

Rinsing (if required)

For aqueous cleaning processes:

• Rinse thoroughly with deionized (DI) water
• Remove any remaining cleaning agents or residues

Improper rinsing can leave ionic contamination that affects coating performance.

Drying and moisture removal

After cleaning, the PCB must be completely dry.

• Use hot air ovens, vacuum drying, or air drying
• Eliminate moisture trapped under components

Moisture can cause bubbling, poor adhesion, or corrosion under the Revestimento conformacional.

Masking sensitive areas

Masking protects areas that should not be coated.

• Connectors, switches, relays, test points
• Use masking tapes, plugs, or custom fixtures

Proper masking ensures functionality is maintained after coating in Montagem SMT.

Surface activation (optional)

In some cases, surface treatment is used to improve coating adhesion.

• Plasma treatment or corona treatment
• Enhances bonding for difficult surfaces

This step is often used in high-reliability Montagem de PCB aplicativos.

Pre-heating (optional)

Pre-heating the PCB before coating can improve results.

• Reduces moisture and viscosity issues
• Helps coating flow evenly
• Minimizes bubbles and defects

This is especially useful in automated Montagem SMT processos.

Final inspection before coating

Before applying Revestimento conformacional, perform a final check:

• Ensure PCB is clean and dry
• Confirm masking is correctly applied
• Verify no foreign particles are present

This step ensures readiness for a successful coating process.

Conclusão final

Preparing a PCB for Revestimento conformacional involves inspection, cleaning, drying, masking, and optional surface treatments. In Montagem de PCB e Montagem SMT, proper preparation is the foundation for achieving reliable coating performance, preventing defects, and ensuring long-term protection of electronic products.

Obter uma cotação de revestimento isolante

Está planejando um novo projeto de PCBA com requisitos de revestimento? Solicite uma cotação rápida abaixo.
Envie-nos seus requisitos e receba uma resposta rápida de nossa equipe de engenharia.

Resposta 24 horas ✔ Suporte de engenharia ✔ Produção pequena e em massa

Ative o JavaScript em seu navegador para preencher este formulário.

Nome

E-mail *

Email Material Preferred

WhatsAPP

Material preferido

• Acrílico (AR)
• Silicone (SR)
• Poliuretano (UR)
• Curável por UV - UV
• Não tenho certeza / Preciso de orientação

Upload de arquivos

Arrastar e soltar arquivos,, Escolha os arquivos para upload Você pode carregar até 8 arquivos.

Para um processamento mais rápido, compacte todos os arquivos Gerber, arquivos Drill e BOM em um único arquivo .ZIP ou .RAR.

Mensagem

"Liste os componentes ou áreas que NÃO devem ser revestidos (por exemplo, conectores, pontos de teste)." Se você tiver requisitos específicos de material de revestimento (por exemplo, HumiSeal), mencione-os na caixa de mensagem abaixo.

Enviar

Shenzhen Tengxinjie Electronics Co., Ltd.