Conforme coating process steps

In PCB-assemblage en SMT-assemblage, de Conforme coating process follows a series of controlled steps to ensure reliable protection against moisture, dust, chemicals, and environmental stress. Proper execution of each step is critical for coating performance and long-term durability.

Inspection before coating

Before applying Conforme coating, the PCB must be carefully inspected.

• Check for solder defects, contamination, or damage
• Ensure all components are properly assembled
• Verify that the board meets quality standards

Any defects left before coating can become difficult to repair later in PCB-assemblage.

Cleaning the PCB

Cleaning is one of the most important steps in the Conforme coating proces.

• Remove flux residues, oils, dust, and ionic contaminants
• Use solvent cleaning, aqueous cleaning, or ultrasonic cleaning
• Ensure the surface is chemically clean for proper adhesion

Poor cleaning can lead to coating failure, delamination, or corrosion.

Drying and moisture removal

After cleaning, the PCB must be completely dry.

• Use ovens or air drying to remove residual moisture
• Prevent trapped moisture under the coating

This step is essential in SMT-assemblage to avoid long-term reliability issues.

Masking

Masking protects areas that should not be coated.

• Connectors, switches, test points, and sockets
• Use tapes, boots, or removable masks

Accurate masking ensures functionality is not affected after Conforme coating.

Coating application

De Conforme coating is then applied using one of several methods:

• Spuitcoating (manual or automated)
• Dompelcoating
• Kwastcoating (for repair or low volume)
• Selectieve coating (automated precision)
• Vapor deposition (for parylene coatings)

The choice depends on production scale and product requirements in PCB-assemblage.

Curing

After application, the coating must be cured to form a protective layer.

• Air cure (common for acrylic)
• Heat cure (epoxy, polyurethane)
• UV cure (fast and efficient)
• Moisture cure (silicone coatings)

Proper curing ensures the coating achieves its mechanical and electrical properties.

Inspection and quality control

Once cured, the coating is inspected to ensure quality.

• Visual inspection under white or UV light
• Check for coverage, thickness, bubbles, or voids
• Verify no unwanted areas are coated

Automated inspection systems are often used in advanced SMT-assemblage lines.

Testing and validation

Final testing ensures the coated PCB meets performance requirements.

• Electrical testing
• Environmental testing (humidity, temperature cycling)
• Adhesion and thickness checks

This step confirms reliability in real-world operating conditions.

Eindconclusie

De Conforme coating process in PCB-assemblage en SMT-assemblage includes inspection, cleaning, drying, masking, coating application, curing, and final inspection. Each step plays a critical role in ensuring that the coating provides effective and long-lasting protection for electronic circuits.

Vraag een offerte aan voor conforme coating

Snelle doorlooptijd nodig voor conformal coating projecten? Dien vandaag nog uw aanvraag in.
Stuur ons je vereisten en krijg snel antwoord van ons engineeringteam.

✔ 24-uurs respons ✔ Engineering-ondersteuning ✔ Kleine & massaproductie

Schakel JavaScript in uw browser in om dit formulier in te vullen.

Naam

E-mail *

WhatsAPP

Aanbevolen materiaal

• Acryl (AR)
• Silicone (SR)
• Polyurethaan (UR)
• UV-uithardbaar - UV
• Ik weet het niet zeker / Heb advies nodig

Bestanden uploaden

Bestanden slepen en neerzetten,, Bestanden kiezen om te uploaden U kunt maximaal 8 bestanden uploaden.

Comprimeer alle Gerber-bestanden, boorbestanden en BOM in een enkel .ZIP- of .RAR-bestand voor snellere verwerking.

WhatsAPP upload File

Bericht

"Vermeld onderdelen of gebieden die NIET mogen worden gecoat (bijv. connectoren, testpunten)." Als u specifieke eisen stelt aan het coatingmateriaal (bijv. HumiSeal), vermeld dit dan in het berichtvak hieronder.

Stuur in

Shenzhen Tengxinjie Electronics Co, Ltd.