Conformal coating be air dried

Ja, Conforme coating can be air dried, and this is one of the most common curing methods used in PCB-assemblage, Prototype PCB-assemblage, and even some low-to-medium volume SMT-assemblage processes. Air drying relies on natural solvent evaporation at room temperature to form a protective film over the PCB.

How air drying works
In air-dry systems, the liquid coating contains solvents that evaporate when exposed to ambient conditions. As the solvent evaporates, the coating solidifies and adheres to the PCB surface, forming a thin, protective layer. This method is widely used for acrylic-based Conforme coating materials.

Typical air drying times

• Tack-free time: 10–30 minutes
• Handling time: 30–60 minutes
• Full cure: 12–24 hours

In Prototype PCB-assemblage, air drying is especially popular because it requires minimal equipment and allows flexible process adjustments.

Advantages of air drying

Simple and cost-effective
No need for ovens or UV systems, making it ideal for small-scale PCB-assemblage or prototyping.

Low thermal stress
Since no high temperatures are involved, sensitive components in SMT-assemblage are not exposed to heat.

Easy process integration
Air drying can be easily implemented without significant changes to existing production lines.

Limitations of air drying

Langere uithardingstijd
Compared to UV or thermal curing, air drying is slower, which may reduce production efficiency in high-volume SMT-assemblage.

Environmental dependency
Temperature, humidity, and airflow significantly affect drying speed and final coating quality.

Potential for contamination
During the longer drying period, dust or particles may settle on the coating surface if the environment is not controlled.

Not suitable for all coatings
Some materials, such as epoxies or certain silicones, require heat or moisture curing and cannot rely solely on air drying.

Best practices for air drying

• Maintain ambient temperature around 20–25°C
• Ensure good ventilation to speed up solvent evaporation
• Control humidity to avoid defects مثل whitening or poor adhesion
• Keep the environment clean to prevent contamination
• Apply thin, even layers to ensure proper drying

When to use air drying

Air drying is ideal for:

• Prototype PCB-assemblage and small batch production
• Applications where heat-sensitive components are used
• Cost-sensitive projects with lower throughput requirements

Concluderend, Conforme coating can absolutely be air dried, especially acrylic types. While it offers simplicity and flexibility in PCB-assemblage en Prototype PCB-assemblage, manufacturers in high-speed SMT-assemblage often prefer faster curing methods like UV or thermal curing to improve efficiency.

Vraag een offerte aan voor conforme coating

Op zoek naar betrouwbare conformal coating oplossingen voor uw PCBA project? Klik hieronder voor een snelle offerte.
Stuur ons je vereisten en krijg snel antwoord van ons engineeringteam.

✔ 24-uurs respons ✔ Engineering-ondersteuning ✔ Kleine & massaproductie

Schakel JavaScript in uw browser in om dit formulier in te vullen.

Preferred upload Material

Naam *

E-mail *

WhatsAPP

Aanbevolen materiaal

• Acryl (AR)
• Silicone (SR)
• Polyurethaan (UR)
• UV-uithardbaar - UV
• Ik weet het niet zeker / Heb advies nodig

Bestanden uploaden

Bestanden slepen en neerzetten,, Bestanden kiezen om te uploaden U kunt maximaal 8 bestanden uploaden.

Comprimeer alle Gerber-bestanden, boorbestanden en BOM in een enkel .ZIP- of .RAR-bestand voor snellere verwerking.

Bericht

"Vermeld onderdelen of gebieden die NIET mogen worden gecoat (bijv. connectoren, testpunten)." Als u specifieke eisen stelt aan het coatingmateriaal (bijv. HumiSeal), vermeld dit dan in het berichtvak hieronder.

Stuur in

Shenzhen Tengxinjie Electronics Co, Ltd.