Prepare PCB for 코팅

Proper preparation is essential before applying 컨포멀 코팅 in PCB 어셈블리 그리고 SMT 어셈블리. A well-prepared PCB ensures strong adhesion, uniform coverage, and long-term protection against environmental factors.

Initial inspection

Before any preparation, the PCB should be carefully inspected.

• Check for solder defects, loose components, or damage
• Ensure all assembly processes are completed
• Verify there are no visible contaminants

Defects should be corrected before coating, as rework becomes more difficult after 컨포멀 코팅.

Cleaning the PCB

Cleaning is the most critical preparation step.

• Remove flux residues, oils, dust, and fingerprints
• Use solvent cleaning, aqueous cleaning, or ultrasonic cleaning
• Ensure the surface is completely free of contaminants

A clean surface is essential for proper adhesion in PCB 어셈블리.

Rinsing (if required)

For aqueous cleaning processes:

• Rinse thoroughly with deionized (DI) water
• Remove any remaining cleaning agents or residues

Improper rinsing can leave ionic contamination that affects coating performance.

Drying and moisture removal

After cleaning, the PCB must be completely dry.

• Use hot air ovens, vacuum drying, or air drying
• Eliminate moisture trapped under components

Moisture can cause bubbling, poor adhesion, or corrosion under the 컨포멀 코팅.

Masking sensitive areas

Masking protects areas that should not be coated.

• Connectors, switches, relays, test points
• Use masking tapes, plugs, or custom fixtures

Proper masking ensures functionality is maintained after coating in SMT 어셈블리.

Surface activation (optional)

In some cases, surface treatment is used to improve coating adhesion.

• Plasma treatment or corona treatment
• Enhances bonding for difficult surfaces

This step is often used in high-reliability PCB 어셈블리 애플리케이션.

Pre-heating (optional)

Pre-heating the PCB before coating can improve results.

• Reduces moisture and viscosity issues
• Helps coating flow evenly
• Minimizes bubbles and defects

This is especially useful in automated SMT 어셈블리 프로세스.

Final inspection before coating

Before applying 컨포멀 코팅, perform a final check:

• Ensure PCB is clean and dry
• Confirm masking is correctly applied
• Verify no foreign particles are present

This step ensures readiness for a successful coating process.

최종 결론

Preparing a PCB for 컨포멀 코팅 involves inspection, cleaning, drying, masking, and optional surface treatments. In PCB 어셈블리 그리고 SMT 어셈블리, proper preparation is the foundation for achieving reliable coating performance, preventing defects, and ensuring long-term protection of electronic products.

컨포멀 코팅 견적 받기

코팅 요구 사항이 있는 새로운 PCBA 프로젝트를 계획 중이신가요? 아래에서 빠른 견적을 요청하세요.
요구 사항을 보내주시면 엔지니어링 팀으로부터 빠른 답변을 받으실 수 있습니다.

24시간 대응 ✔ 엔지니어링 지원 ✔ 소규모 및 대량 생산

이 양식을 작성하려면 브라우저에서 JavaScript를 활성화하세요.

이름

이메일 *

WhatsAPP

선호 자료

• 아크릴(AR)
• 실리콘(SR)
• 폴리우레탄(UR)
• UV 경화 - UV
• 잘 모르겠음 / 조언이 필요함

Material Preferred Email

파일 업로드

파일을 끌어다 놓습니다,, 업로드할 파일 선택 최대 8 파일까지 업로드할 수 있습니다.

빠른 처리를 위해 모든 거버 파일, 드릴 파일 및 BOM을 하나의 .ZIP 또는 .RAR 파일로 압축하세요.

메시지

"코팅해서는 안 되는 부품이나 부위(예: 커넥터, 테스트 포인트)를 기재해 주세요." 특정 코팅 재료 요구 사항(예: 휴미씰)이 있는 경우 아래 메시지 상자에 이를 언급해 주세요.

제출하기

심천 텅신지에 전자 유한 공사.