Rivestimento conforme process steps

In Assemblaggio di PCB e Assemblaggio SMT, il Rivestimento conforme process follows a series of controlled steps to ensure reliable protection against moisture, dust, chemicals, and environmental stress. Proper execution of each step is critical for coating performance and long-term durability.

Inspection before coating

Before applying Rivestimento conforme, the PCB must be carefully inspected.

• Check for solder defects, contamination, or damage
• Ensure all components are properly assembled
• Verify that the board meets quality standards

Any defects left before coating can become difficult to repair later in Assemblaggio di PCB.

Cleaning the PCB

Cleaning is one of the most important steps in the Rivestimento conforme processo.

• Remove flux residues, oils, dust, and ionic contaminants
• Use solvent cleaning, aqueous cleaning, or ultrasonic cleaning
• Ensure the surface is chemically clean for proper adhesion

Poor cleaning can lead to coating failure, delamination, or corrosion.

Drying and moisture removal

After cleaning, the PCB must be completely dry.

• Use ovens or air drying to remove residual moisture
• Prevent trapped moisture under the coating

This step is essential in Assemblaggio SMT to avoid long-term reliability issues.

Masking

Masking protects areas that should not be coated.

• Connectors, switches, test points, and sockets
• Use tapes, boots, or removable masks

Accurate masking ensures functionality is not affected after Rivestimento conforme.

Coating application

Il Rivestimento conforme is then applied using one of several methods:

• Rivestimento a spruzzo (manual or automated)
• Rivestimento per immersione
• Rivestimento a pennello (for repair or low volume)
• Rivestimento selettivo (automated precision)
• Vapor deposition (for parylene coatings)

The choice depends on production scale and product requirements in Assemblaggio di PCB.

Curing

After application, the coating must be cured to form a protective layer.

• Air cure (common for acrylic)
• Heat cure (epoxy, polyurethane)
• UV cure (fast and efficient)
• Moisture cure (silicone coatings)

Proper curing ensures the coating achieves its mechanical and electrical properties.

Inspection and quality control

Once cured, the coating is inspected to ensure quality.

• Visual inspection under white or UV light
• Check for coverage, thickness, bubbles, or voids
• Verify no unwanted areas are coated

Automated inspection systems are often used in advanced Assemblaggio SMT lines.

Testing and validation

Final testing ensures the coated PCB meets performance requirements.

• Electrical testing
• Environmental testing (humidity, temperature cycling)
• Adhesion and thickness checks

This step confirms reliability in real-world operating conditions.

Conclusione finale

Il Rivestimento conforme process in Assemblaggio di PCB e Assemblaggio SMT includes inspection, cleaning, drying, masking, coating application, curing, and final inspection. Each step plays a critical role in ensuring that the coating provides effective and long-lasting protection for electronic circuits.

Richiedete un preventivo per il rivestimento conforme

Avete bisogno di tempi rapidi per progetti di rivestimento conformale? Inviate oggi stesso la vostra richiesta.
Inviateci i vostri requisiti e riceverete una risposta rapida dal nostro team di ingegneri.

✔ Risposta in 24 ore ✔ Supporto ingegneristico ✔ Produzione di piccole dimensioni e di massa

Per completare questo modulo, abilitare JavaScript nel browser.

Nome

WhatsAPP upload Email

Email *

WhatsAPP

Materiale preferito

• Acrilico (AR)
• Silicone (SR)
• Poliuretano (UR)
• Polimerizzabile UV - UV
• Non sono sicuro / Ho bisogno di un consiglio

Caricamento dei file

Trascinamento dei file,, Scegliere i file da caricare È possibile caricare fino a 8.

Si prega di comprimere tutti i file Gerber, i file di foratura e la distinta base in un unico file .ZIP o .RAR per una più rapida elaborazione.

Messaggio

"Elencare i componenti o le aree che NON devono essere rivestite (ad esempio, connettori, punti di test)". Se avete requisiti specifici sul materiale di rivestimento (ad esempio, HumiSeal), indicatelo nella casella di messaggio sottostante.

Invia

Shenzhen Tengxinjie Electronics Co., Ltd.