Prepare PCB for Rivestimento

Proper preparation is essential before applying Rivestimento conforme in Assemblaggio di PCB e Assemblaggio SMT. A well-prepared PCB ensures strong adhesion, uniform coverage, and long-term protection against environmental factors.

Initial inspection

Before any preparation, the PCB should be carefully inspected.

• Check for solder defects, loose components, or damage
• Ensure all assembly processes are completed
• Verify there are no visible contaminants

Defects should be corrected before coating, as rework becomes more difficult after Rivestimento conforme.

Cleaning the PCB

Cleaning is the most critical preparation step.

• Remove flux residues, oils, dust, and fingerprints
• Use solvent cleaning, aqueous cleaning, or ultrasonic cleaning
• Ensure the surface is completely free of contaminants

A clean surface is essential for proper adhesion in Assemblaggio di PCB.

Rinsing (if required)

For aqueous cleaning processes:

• Rinse thoroughly with deionized (DI) water
• Remove any remaining cleaning agents or residues

Improper rinsing can leave ionic contamination that affects coating performance.

Drying and moisture removal

After cleaning, the PCB must be completely dry.

• Use hot air ovens, vacuum drying, or air drying
• Eliminate moisture trapped under components

Moisture can cause bubbling, poor adhesion, or corrosion under the Rivestimento conforme.

Masking sensitive areas

Masking protects areas that should not be coated.

• Connectors, switches, relays, test points
• Use masking tapes, plugs, or custom fixtures

Proper masking ensures functionality is maintained after coating in Assemblaggio SMT.

Surface activation (optional)

In some cases, surface treatment is used to improve coating adhesion.

• Plasma treatment or corona treatment
• Enhances bonding for difficult surfaces

This step is often used in high-reliability Assemblaggio di PCB applicazioni.

Pre-heating (optional)

Pre-heating the PCB before coating can improve results.

• Reduces moisture and viscosity issues
• Helps coating flow evenly
• Minimizes bubbles and defects

This is especially useful in automated Assemblaggio SMT processi.

Final inspection before coating

Before applying Rivestimento conforme, perform a final check:

• Ensure PCB is clean and dry
• Confirm masking is correctly applied
• Verify no foreign particles are present

This step ensures readiness for a successful coating process.

Conclusione finale

Preparing a PCB for Rivestimento conforme involves inspection, cleaning, drying, masking, and optional surface treatments. In Assemblaggio di PCB e Assemblaggio SMT, proper preparation is the foundation for achieving reliable coating performance, preventing defects, and ensuring long-term protection of electronic products.

Richiedete un preventivo per il rivestimento conforme

State pianificando un nuovo progetto PCBA con requisiti di rivestimento? Richiedete un preventivo rapido qui sotto.
Inviateci i vostri requisiti e riceverete una risposta rapida dal nostro team di ingegneri.

✔ Risposta in 24 ore ✔ Supporto ingegneristico ✔ Produzione di piccole dimensioni e di massa

Per completare questo modulo, abilitare JavaScript nel browser.

Nome

File Preferred upload

Email *

WhatsAPP

Materiale preferito

• Acrilico (AR)
• Silicone (SR)
• Poliuretano (UR)
• Polimerizzabile UV - UV
• Non sono sicuro / Ho bisogno di un consiglio

Caricamento dei file

Trascinamento dei file,, Scegliere i file da caricare È possibile caricare fino a 8.

Si prega di comprimere tutti i file Gerber, i file di foratura e la distinta base in un unico file .ZIP o .RAR per una più rapida elaborazione.

Messaggio

"Elencare i componenti o le aree che NON devono essere rivestite (ad esempio, connettori, punti di test)". Se avete requisiti specifici sul materiale di rivestimento (ad esempio, HumiSeal), indicatelo nella casella di messaggio sottostante.

Invia

Shenzhen Tengxinjie Electronics Co., Ltd.