Solvent-based coating

Solvent-based coating est un type de Revêtement conforme in which the protective material (such as acrylic, polyurethane, or silicone resin) is dissolved in an organic solvent. This solvent acts as a carrier, allowing the coating to be easily applied to the surface of a PCB. After application, the solvent evaporates, leaving behind a thin, uniform protective film.

En Assemblage du circuit imprimé, Prototype d'assemblage de circuits imprimés, et Assemblage SMT, solvent-based coatings are widely used due to their ease of application, fast drying time, and reliable performance.

How solvent-based coating works
When applied—typically by spraying, dipping, or brushing—the liquid coating spreads evenly across the board. As the solvent evaporates under ambient conditions or mild heating, the solid resin forms a continuous insulating and պաշտպանիչ layer. This process is relatively simple and does not require complex curing equipment.

Key advantages
Solvent-based Revêtement conforme offre plusieurs avantages :

• Application facile: Compatible with manual and automated processes in Assemblage SMT
• Good surface coverage: Flows well into tight spaces and around components
• Séchage rapide: Suitable for high-throughput Assemblage du circuit imprimé lignes
• Reworkability: Many solvent-based coatings (especially acrylic) can be removed with solvents

Common materials used
Most traditional conformal coatings fall into this category, including:

• Acrylic coatings (most common)
• Polyurethane coatings
• Some silicone-based coatings

En Prototype d'assemblage de circuits imprimés, solvent-based coatings are often chosen for their flexibility and ease of testing different formulations.

Limites
Despite their advantages, solvent-based coatings also have some drawbacks:

• VOC emissions: Organic solvents can release volatile organic compounds, impacting the environment and worker safety
• Flammability: Requires proper handling and ventilation
• Shrinkage: As solvent evaporates, slight thickness reduction may occur

Because of these concerns, some manufacturers are shifting toward water-based ou UV-curable alternatives in modern Assemblage du circuit imprimé processus.

Applications
Solvent-based coatings are suitable for a wide range of electronics, including consumer devices, industrial controls, and telecommunications equipment, where reliable moisture and contamination protection is needed.

En conclusion, solvent-based coating is a traditional and widely used form of Revêtement conforme that offers ease of use, fast processing, and good protective performance. It remains a practical solution in Assemblage du circuit imprimé, Assemblage SMT, et Prototype d'assemblage de circuits imprimés, especially where reworkability and cost-effectiveness are important.

Obtenir un devis pour un revêtement conforme

Vous souhaitez optimiser le coût du revêtement sans compromettre la qualité ? Contactez-nous dès maintenant.
Envoyez-nous vos exigences et obtenez une réponse rapide de notre équipe d'ingénieurs.

✔ Réponse dans les 24 heures ✔ Soutien technique ✔ Production en petite et grande série

Veuillez activer JavaScript dans votre navigateur pour remplir ce formulaire.

Nom

Courriel *

WhatsAPP

Matériau préféré

• Acrylique (AR)
• Silicone (SR)
• Polyuréthane (UR)
• Durcissable aux UV - UV
• Je ne suis pas sûr / Besoin de conseils

Téléchargement de fichiers

Glisser-déposer des fichiers,, Choisir les fichiers à télécharger Vous pouvez télécharger jusqu'à 8.

Veuillez compresser tous les fichiers Gerber, les fichiers de forage et les nomenclatures dans un seul fichier .ZIP ou .RAR pour un traitement plus rapide.

Preferred Material Email

Message

"Veuillez énumérer les composants ou les zones qui ne doivent PAS être recouverts (par exemple, les connecteurs, les points de test). Si vous avez des exigences spécifiques concernant le matériau de revêtement (par exemple, HumiSeal), veuillez le mentionner dans la boîte de message ci-dessous.

Soumettre

Shenzhen Tengxinjie Electronics Co. Ltd.