Test coating quality

Testing coating quality is a critical step in ensuring the reliability of Revêtement conforme en Assemblage du circuit imprimé et Assemblage SMT. Proper inspection and testing help verify that the coating provides effective protection against moisture, dust, chemicals, and environmental stress.

Visual inspection

Visual inspection is the most basic and widely used method.

What to check:

• Uniform coating coverage
• Absence of bubbles, cracks, or pinholes
• No contamination or foreign particles
• Proper masking boundaries

Under normal or magnified light, inspectors can quickly identify obvious defects in Revêtement conforme.

UV inspection

Many Revêtement conforme materials contain UV tracers.

Process:

• Expose PCB to UV light
• Coating fluoresces, making coverage visible

Benefits:

• Detects missed areas or thin coating
• Improves inspection accuracy in Assemblage SMT

Thickness measurement

Coating thickness is essential for performance.

Methods:

• Wet film thickness gauge (before curing)
• Dry film thickness measurement (after curing)
• Micrometer or ultrasonic measurement

Proper thickness ensures optimal protection without affecting component function in Assemblage du circuit imprimé.

Adhesion testing

Adhesion testing checks how well the coating bonds to the PCB.

Common methods:

• Cross-hatch (tape) test
• Scratch test

Good adhesion ensures long-term durability of Revêtement conforme.

Electrical testing

Electrical performance must not be compromised.

Tests include:

• Insulation resistance testing
• Dielectric withstand (Hi-Pot) testing

These confirm that the coating enhances insulation in Assemblage SMT.

Environmental and reliability testing

For high-reliability applications, environmental tests are required.

Examples:

• Temperature cycling
• Test d'humidité
• Salt spray (corrosion) testing

These tests simulate real-world conditions to validate Revêtement conforme performance.

Inspection optique automatisée (AOI)

En avance Assemblage du circuit imprimé, AOI systems are used to detect coating defects.

Advantages:

• High-speed inspection
• Consistent and repeatable results
• Suitable for mass production

Common coating defects detected

• Uneven thickness
• Bubbles and voids
• Delamination
• Incomplete coverage
• Contamination

Early detection prevents failures in final products.

Conclusion finale

Testing coating quality is essential in Assemblage du circuit imprimé et Assemblage SMT to ensure the effectiveness of Revêtement conforme. By combining visual inspection, UV inspection, thickness measurement, adhesion testing, and environmental testing, manufacturers can guarantee high reliability and long-term protection of electronic devices.

Obtenir un devis pour un revêtement conforme

Obtenez dès aujourd'hui des conseils d'experts et des tarifs pour vos besoins en matière de revêtement conforme.
Envoyez-nous vos exigences et obtenez une réponse rapide de notre équipe d'ingénieurs.

✔ Réponse dans les 24 heures ✔ Soutien technique ✔ Production en petite et grande série

Veuillez activer JavaScript dans votre navigateur pour remplir ce formulaire.

Nom *

Courriel *

WhatsAPP

Layout Email File

Matériau préféré

• Acrylique (AR)
• Silicone (SR)
• Polyuréthane (UR)
• Durcissable aux UV - UV
• Je ne suis pas sûr / Besoin de conseils

Téléchargement de fichiers

Glisser-déposer des fichiers,, Choisir les fichiers à télécharger Vous pouvez télécharger jusqu'à 8.

Veuillez compresser tous les fichiers Gerber, les fichiers de forage et les nomenclatures dans un seul fichier .ZIP ou .RAR pour un traitement plus rapide.

Message

"Please list components or areas that must NOT be coated (e.g., connectors, test points)." If you have specific coating material requirements (e.g., HumiSeal), Please indicate this in the comment box.

Soumettre

Shenzhen Tengxinjie Electronics Co. Ltd.