Bubbles in conformal coating

Bubbles in Revestimiento conforme are a common defect that can compromise protection, insulation, and long-term reliability. In Montaje de PCB, Montaje de prototipos de PCB, y Montaje SMT, bubbles may create weak points where moisture, contaminants, or air can penetrate, leading to corrosion or electrical failure. Preventing bubbles requires proper material handling, surface preparation, and process control.

Ensure proper PCB cleaning
One of the main causes of bubbles is contamination such as flux residue, oil, or dust. Before coating in Montaje de PCB, the board must be thoroughly cleaned and dried. Residual solvents or moisture can outgas during curing, forming bubbles under the coating.

Control moisture and humidity
Moisture trapped in components or the PCB can vaporize during coating or curing. In Montaje SMT, it’s important to store boards in controlled environments and, if necessary, pre-bake them to remove absorbed moisture before applying Revestimiento conforme.

Use correct coating viscosity
If the coating is too thick, it may trap air during application. Proper dilution (if allowed by the manufacturer) and maintaining the recommended viscosity help the coating flow smoothly and release trapped air.

Apply coating evenly and at the right speed
Application method matters. Whether spraying, dipping, or brushing, applying the coating too quickly can introduce air bubbles. In automated Montaje SMT lines, parameters such as spray pressure, nozzle distance, and flow rate should be optimized to ensure smooth, even coverage.

Avoid excessive coating thickness
Applying overly thick layers increases the risk of bubble formation and solvent entrapment. It is better to apply multiple thin layers rather than one heavy coat in Montaje de PCB procesos.

Degas the coating material
Before use, some coatings can be degassed (removing dissolved air) to prevent bubble formation. This is especially useful in Montaje de prototipos de PCB, where process optimization is being tested.

Allow proper flash-off time
After application, giving the coating time for solvents to evaporate (flash-off) before full curing helps prevent bubbles. Rushing the curing process can trap solvent vapors inside the coating.

Optimize curing conditions
Curing too quickly or at too high a temperature can cause rapid solvent evaporation, leading to bubbling. Controlled curing—whether thermal or UV—ensures a smooth, defect-free finish.

Inspect and adjust process
En Montaje de prototipos de PCB, visual inspection (often with UV light) helps identify bubble issues early. Process parameters can then be fine-tuned before moving to mass production.

In conclusion, avoiding bubbles in Revestimiento conforme requires attention to cleaning, moisture control, application technique, and curing conditions. By optimizing these factors in Montaje de PCB, Montaje SMT, y Montaje de prototipos de PCB, manufacturers can achieve a smooth, uniform coating that delivers reliable protection.

Obtenga un presupuesto de revestimiento de conformación

Desde el montaje SMT hasta el revestimiento de conformación, ofrecemos soluciones integrales. Pida presupuesto ahora.
Envíenos sus requisitos y obtenga una respuesta rápida de nuestro equipo de ingenieros.

✔ Respuesta en 24 horas ✔ Soporte de ingeniería ✔ Producción en serie y a pequeña escala

Active JavaScript en su navegador para rellenar este formulario.

Nombre *

Correo electrónico *

WhatsAPP

Material preferido

• Acrílico (AR)
• Silicona (SR)
• Poliuretano (UR)
• UV Curable - UV
• No estoy seguro / Necesito consejo

Material WhatsAPP Preferido

Carga de archivos

Arrastrar y soltar archivos,, Elija los archivos que desea cargar Puedes cargar hasta 8.

Comprima todos los archivos Gerber, los archivos de perforación y la lista de materiales en un único archivo .ZIP o .RAR para un procesamiento más rápido.

Mensaje

"Enumere los componentes o zonas que NO deben revestirse (por ejemplo, conectores, puntos de prueba)". Si tiene requisitos específicos de material de revestimiento (por ejemplo, HumiSeal), menciónelo en el cuadro de mensaje que aparece a continuación.

Enviar

Shenzhen Tengxinjie Electronics Co.